In Charge Laptop Locker 1 Door, 5 comps - 900mm

Code: MH5511LCS

Select size

Select colour

QTY:

£386.98 +VAT

£464.38 inc VAT

Select Extras

Master Key
	M Series Masterkey M Series Masterkey	£16.80 ea +vat
Lock
	M Series Ronis Standard Camlock M Series Ronis Standard Camlock Ronis standard camlocks for use on Link metal lockers come with 2 keys as standard and are fitted using a horseshoe clip fitting. They are a none cost option when ordered with metal lockers and are factory fitted. Replacements also available at additional cost.	£0.00 ea +vat
	M Series Hasp & Staple Latch Lock M Series Hasp & Staple Latch Lock Hasp & Staple Latch locks for use with padlocks to secure lockers (Padlocks not included but can be purchased as an accessory if required). Oval handle with round cut out to take a 6mm padlock shaft. Fitted as a no cost option when ordering lockers. Replacements available.	£0.00 ea +vat

Compact Single Door Laptop Locker 900mm high
Simple plug in kettle lead
Socket in side of each compartment
Delivery: 25 working days

Request Callback

This half height laptop charging locker is an ideal choice, being only 900mm high it provides convenient storage for five laptops or notepads. This handy unit is able to charge and store 5 laptops at the same time with just one door to access the five compartments. Ventilated in the sides and fully CE certified and PAT tested.

Choice of door colours
Choice of lock options available at checkout
Sturdy all steel construction
3 knuckle hinges and reinforced doors
Easily replaced riveted doors
Ventilation in sides and backs
Side mounted 3 pin socket
RCD cable included
Nesting Bolts Available to add on at check out, please note 4 nesting bolts needed per side.

For further information on our charging laptop locker range click here

*Nearest off-loading point determined by driver. Driver not insured to carry up any stairs. Single driver Vehicle – Assistance will be required for off-loading of large orders.

Delivery to Home Addresses: Sorry but we are unable to deliver this product to home addresses.

Please Note: The vast majority of our products are manufactured to order and cannot be taken back into stock or exchanged after delivery. Further for further information please contact us.

Code	Height	Width	Depth
MH5511LCS	930mm	450mm	450mm
MH5511LCSST	0mm	0mm	0mm

The locking options below are availble to buy after adding the product above to your basket.

M Series Ronis Standard Camlock

M Series Hasp & Staple Latch Lock

Hasp & Staple Latch locks for use with padlocks to secure lockers. Oval handle with round cut out to take a 6mm padlock shaft. Fitted as a no cost option when ordering lockers. Replacements available at additioanal cost.

The accessories below are availble to buy after adding the product above to your basket.

M Series Masterkey

Masterkey override for M sereis standard metal lockers.

L&F camlocks 95/97series

M Series Number Plate

Size 37mm long x 19mm high
Fits neatly into M sereis plastic escutcheon plate around lock
Rigid plastic with self adhesive backng

M Series Numbered Key Rings

Numbered key rings to match numbering system on locker doors
Round discs printed with upto 4 digits long
Split pin ring

M Series Installation Nesting Bolts Pack of 25

Serious injury could be caused by locker or cupboard tip over. It is important to install your lockers or cupboards side to side, back to back and back to wall. Nesting bolts to suit M Series lockers, please note 4 nesting bolts per side required. Nesting Bolts are supplied as packs of 25, please calculate how many nesting bolts required and order accordingly. Please see our installation guide https://www.3dlockers.co.uk/guides/how-to-install-lockers/

Standard Delivery Leadtime
Estimated delivery is 25 working days. Leadtimes quoted are in indication only, and may increase/decrease depending on manufacturing capacity at time of order. Larger orders may take longer than the estimated delivery leadtime.

Standard Delivery Day and Time
The vast majority of deliveries are made anyday Mon-Fri 8.30am to 5.00pm.

Specific Day and Timed Deliveries
On certain products, it may be possible to request a particular day or time for delivery at additional cost. Please contact us for further information and pricing.

Standard Delivery Cost (UK Mainland)
FREE DELIVERY is available on the vast majority of products for orders over £150.00+vat. A £25.00+vat carriage charge will be applied if the order value falls under this amount.

Scottish postcodes including HIghlands and Islands, Truro and Belfast are also exempt from free delivery on certain products. Please check product page for further information and contact us for pricing.

Delivery (Non UK Mainland)
Delivery to extremities and offshore locations is available by arrangement and at an extra cost.

Delivery To Home Addresses: Sorry but we DO NOT deliver to home addresses at this time. If we deem a delivery is to a home address, we will automatically cancel and refund the order within 5 working days.

Delivery Restrictions
Please advise of any delivery restrictions (opening times and vehicle access sizes) prior to order. Failed deliveries will be chargeable.

Please note delivery is to a ground floor entrance or nearest offloading point only which maybe kerbside only. Driver's are not insured to distribute goods around a building or use lifts.

Off loading preparation
For larger orders, assistance will be required in offloading.

See our full delivery and returns policy.

Installation Service
Our installation service is available on this product. Please call our friendly sales team on 01924 24291 for more up to date information.

* Subject to area, subject to order quantity.

The contraction of infection from equipment is a recognised risk in the healthcare sector, office and education establishments and public buildings. It is essential to take precautions to reduce the risk of bacterial cross contamination.

Here at 3D Lockers we can provide an effective solution to minimizing these risks. Our storage lockers have a unique anti-bacterial powder coating incorporated at the time of manufacture. BioCote antimicrobial technology offers constant protection against a wide range of bacteria including MRSA, E. coli, Salmonella, Listeria and Campylobacter.

Field tests have proven that storage equipment treated with BioCote powder coating benefit from a 94% reduction in bacteria on their surface, helping to create a cleaner and more hygienic working environment.

BioCote also helps stop the build up of ugly black mould, keeping their appearance for longer.

BioCote will not wear off or leak – it is long lasting and will retain its antimicrobial efficiency for the lifetime of a product!

});

Easy Payment Options

FREE Standard UK Delivery

Request A Quote

Over 25 Years Trading

In Charge Laptop Locker 1 Door, 5 comps - 900mm