01924 240291

Total: £0.00

0

Your basket is currently empty.

Strong Hold Heavy Duty Lockers Two Door

Code: MStrong2

Standard colours
Black
Blue
Dark Grey
Light Blue
Light Grey
Racing Green
Traffic Red
Yellow
Pastel colours - note pastel colours incurr a 0% surcharge
White 9010

£260.19 +VAT

£312.23 inc VAT

Select Extras

Master Key
M Series Masterkey M Series Masterkey

M Series Masterkey

£16.80 ea
+vat
  • Extra strong two door steel locker to withstand the toughest of environments

  • Double skin door to guard against leverage and impact damage

  • Ideal for schools, colleges, prisons and industrial workplaces where security and durability are key

  • FREE Delivery to most of the UK Mainland – Orders over £150

  • Delivery to Ground floor entrance OR Nearest off-loading point*

  • Delivery: 22-25 working days
  • Leadtimes are an indication only and may increase/decrease subject to manufacturing capacity at time of order.
  • Installation of lockers - it is important to install your lockers in a safe and secure manner, please see our locker installation guide.

Request Callback

Part of the strong hold range of lockers, this two door heavy duty locker is perfect for providing long lasting security.  Suitable for high impact and heavy user areas, these two tier heavy duty steel lockers are some of the strongest in the marketplace.  Ideal if require industrial strength lockers for industry, factories and schools.

These robust, heavy duty lockers feature:

  • Carcass made from 70% thicker steel than standard carcass for extra strength.
  • Strengthened door constructed from heavy gauge steel, reinforced at the top and base.
  • 5 knuckle hinge welded to the door, but riveted to the frame to allow for easy replacement.
  • A wrap around secure section located behind the full length of the door frame. when closed, protecting against forced entry.
  • Security shelf to prevent unauthorised access to the compartment below.
  • Right angled door flange to guard against leverage.
  • Powder coated with BioCote antibacterial paint finish to combat the spread of bacteria and germs along with protecting against corrosion and general wear and tear.
  • Pre drilled for nesting on location
  • Camlocks and Hasp & Staple Locks come as standard.  Coin Return/Coin Retain Locks are available please contact us.
  • Nesting Bolts Available to add on at check out, please note 4 nesting bolts needed per side.

*Nearest off-loading point determined by driver. Driver not insured to carry up any stairs. Single driver Vehicle – Assistance will be required for off-loading of large orders.

Delivery to Home Addresses: Sorry but we are unable to deliver this product to home addresses.

Please Note: The vast majority of our products are manufactured to order and cannot be taken back into stock or exchanged after delivery. Further for further information please contact us.

Code Height Width Depth
S12212-92 1776mm 305mm 305mm
S12512-92 1776mm 305mm 457mm
S12212-11 0mm 0mm 0mm
S12512-11 1776mm 305mm 457mm
S12211-75A 1776mm 305mm 305mm
S12512-75A 1776mm 305mm 457mm
S12212-85A 1776mm 305mm 457mm
S112512-85A 1776mm 305mm 457mm

The accessories below are availble to buy after adding the product above to your basket.

M Series Masterkey

M Series Masterkey

Masterkey override for M sereis standard metal lockers.  

L&F camlocks 95/97series

M Series Numbered Key Rings

M Series Numbered Key Rings

  • Numbered key rings to match numbering system on locker doors
  • Round discs printed with upto 4 digits long
  • Split pin ring
M Series Installation Nesting Bolts Pack of 25

M Series Installation Nesting Bolts Pack of 25

Serious injury could be caused by locker or cupboard tip over.  It is important to install your lockers or cupboards side to side, back to back and back to wall. Nesting bolts to suit M Series lockers, please note 4 nesting bolts per side required. Nesting Bolts are supplied as packs of 25, please calculate how many nesting bolts required and order accordingly. Please see our installation guide https://www.3dlockers.co.uk/guides/how-to-install-lockers/

Delivery

Standard Delivery (UK Mainland only)
Estimated delivery is 22-25 working days. Mon - Fri 8.30am to 5.00pm.

Standard Delivery Cost (UK Mainland)
FREE DELIVERY on orders over £150.00+vat. A £25.00+vat carriage charge will be applied if the order value falls under this amount.

Free delivery on this product is exempt from all Scottish postcodes, Truro, Belfast and all islands. Please call for pricing.

Standard Delivery (Non UK Mainland)
Delivery to extremities and offshore locations is available by arrangement and at an extra cost.

Delivery To Home Addresses: Sorry but we DO NOT deliver to home addresses at this time. If we deem a delivery is to a home address, we will automatically cancel and refund the order within 5 working days.

Larger orders: The delivery lead time for larger orders could be extended. Please call us on 01924 240291 for up to date delivery times.

Returns Policy: These lockers are manufactured to order. Once in the production stage they cannot be cancelled, returned or exchanged.

Off Loading: Delivery is to a ground floor point only. Driver assistance for offloading will be required for large deliveries.

See our full delivery and returns policy.

Installation

Installation Service
Our installation service is available on this product. Please call our friendly sales team on 01924 24291 for more up to date information.

* Subject to area, subject to order quantity.

The contraction of infection from equipment is a recognised risk in the healthcare sector, office and education establishments and public buildings. It is essential to take precautions to reduce the risk of bacterial cross contamination.

Here at 3D Lockers we can provide an effective solution to minimizing these risks. Our storage lockers have a unique anti-bacterial powder coating incorporated at the time of manufacture. BioCote antimicrobial technology offers constant protection against a wide range of bacteria including MRSA, E. coli, Salmonella, Listeria and Campylobacter.

Field tests have proven that storage equipment treated with BioCote powder coating benefit from a 94% reduction in bacteria on their surface, helping to create a cleaner and more hygienic working environment.

BioCote also helps stop the build up of ugly black mould, keeping their appearance for longer.

BioCote will not wear off or leak – it is long lasting and will retain its antimicrobial efficiency for the lifetime of a product!

});

What our customers say about us...