Link Metal Four Door In Charge Tool Locker - 180cm Tall

The Four Door In-Charge Tool Locker is designed to meet the needs of construction companies, builders, maintenance departments, site cabins, and more. It provides a secure space for storing portable power tools and electrical equipment while charging. Each compartment is equipped with a three-pin UK single or double socket, allowing for easy access to power.

A power lead with an RCD is supplied to plug into the locker, offering enhanced safety by enabling the easy replacement of the lead if it becomes damaged. The locker is available with either a flat top or sloping top; the sloping top helps prevent litter from collecting, ensuring a clean and tidy workspace.

Choose from a selection of door colors and lock options, including a standard camlock or hasp & staple lock, to suit your specific security needs.

Features:

• Four locker compartments
• Fitted 3 pin single/double socket per compartment
• Power lead
• All doors independently earthed to locker body
• Each shelf has front-to-rear reinforcing box section for added security
• Vented locker doors to prevent heat build up
• Camlocks or Hasp & Staple locking options (not shown in picture)
• Flat top or sloping top options
• Steel three knuckle hinges
• Two depths: 300mm or 450mm
• Supply Voltage: 230v
• Maximum Current Consumption: 13 amp
• CE Marked
• Nesting Bolts Available to add on at check out, please note 4 nesting bolts needed per side.

*Nearest off-loading point determined by driver. Driver not insured to carry up any stairs. Single driver Vehicle – Assistance will be required for off-loading of large orders.

Delivery to Home Addresses: Sorry but we are unable to deliver this product to home addresses.

Please Note: The vast majority of our products are manufactured to order and cannot be taken back into stock or exchanged after delivery. Further for further information please contact us.

Height: 1800mm

Width: 300mm

Depth: 300mm or 450mm

The locking options below are availble to buy after adding the product above to your basket.

M Series Standard Camlock

• Standard camlock with 2 keys per lock 
• Available at checkout at no additional cost
• Replacement locks and/or keys are available at a later date

M Series Hasp & Staple Latch Lock

• Hasp & Staple Latch locks for use with padlocks to secure lockers. 
• Oval handle with round cut out to take a 6mm padlock shaft. (Padlocks not included) 
• Fitted as a no cost option when ordering lockers.  Replacements available at additioanal cost.

Ronis Coin Return Lock for In charge Tool Locker

• This Ronis coin return lock is factory fitted keeping  keys captive until coin inserted.
• Available at checkout at additional cost

The accessories below are availble to buy after adding the product above to your basket.

M Series Masterkey (for Camlocks)

Masterkey override for M sereis standard metal lockers.  

L&F camlocks 95/97series

M Series Numbered Key Rings

• Numbered key rings to match numbering system on locker doors
• Round discs printed with upto 4 digits long
• Split pin ring

M Series Large Number Plate

M Series Installation Nesting Bolts Pack of 25

Serious injury could be caused by locker or cupboard tip over.  It is important to install your lockers or cupboards side to side, back to back and back to wall. Nesting bolts to suit M Series lockers, please note 4 nesting bolts per side required. Nesting Bolts are supplied as packs of 25, please calculate how many nesting bolts required and order accordingly. Please see our installation guide https://www.3dlockers.co.uk/guides/how-to-install-lockers/

The contraction of infection from equipment is a recognised risk in the healthcare sector, office and education establishments and public buildings. It is essential to take precautions to reduce the risk of bacterial cross contamination.

Here at 3D Lockers we can provide an effective solution to minimizing these risks. Our storage lockers have a unique anti-bacterial powder coating incorporated at the time of manufacture. BioCote antimicrobial technology offers constant protection against a wide range of bacteria including MRSA, E. coli, Salmonella, Listeria and Campylobacter.

Field tests have proven that storage equipment treated with BioCote powder coating benefit from a 94% reduction in bacteria on their surface, helping to create a cleaner and more hygienic working environment.

BioCote also helps stop the build up of ugly black mould, keeping their appearance for longer.

BioCote will not wear off or leak – it is long lasting and will retain its antimicrobial efficiency for the lifetime of a product!