Slimline Lockers

Code: Mslimline

Select size

Select nest

Select colour
Standard colours

Pastel colours - note pastel colours incurr a 0% surcharge

Select lock

QTY:

£103.45 +VAT

£124.14 inc VAT

Select Extras

Lock
	M Series Standard Camlock M Series Standard Camlock Ronis standard camlocks for use on Link metal lockers come with 2 keys as standard and are fitted using a horseshoe clip fitting. They are a none cost option when ordered with metal lockers and are factory fitted. Replacements also available at additional cost.	£0.00 ea +vat
	M Series Hasp & Staple Latch Lock M Series Hasp & Staple Latch Lock Hasp & Staple Latch locks for use with padlocks to secure lockers (Padlocks not included but can be purchased as an accessory if required). Oval handle with round cut out to take a 6mm padlock shaft. Fitted as a no cost option when ordering lockers. Replacements available.	£0.00 ea +vat
	M Series Coin Return lock M Series Coin Return lock Coin return locks are a handy way to lock your lockers whilst ensuring that the key is always returned ready for the next user. The key is kept captive until a £1 coin is inserted into the box at the rear of the locker. When the key is returned and the door is opened the £1 coin is returned into the tray for the user to reclaim. Factory fitted option when ordered with lockers.	£35.03 ea +vat
	M Series Ronis Coin Retain Lock M Series Ronis Coin Retain Lock Create an income stream from your lockers by including a coin retain lock. Users insert a £1 or 20p coin to be able to lock their locker doors. The key remains captive until the coin is inserted. The lock fits easily onto the rear door and has a lockable box to collect the £1 coins. Factory fitted option when ordering lockers.	£83.77 ea +vat
	M Series 4 Scroll Combination Lock M Series 4 Scroll Combination Lock The Four Digit Tumbler multi combination locks have 10,000 possible codes sequences. Ideal for private or staff use. Number can be changed after each opening to code of choice and scrambled on door closure. A masterkey override is available to reset locks should codes be lost.	£40.13 ea +vat
	M Series Digital Combination Lock M Series Digital Combination Lock Digital combination lock can be seated vertically or horizontally. No need for keys - users set their own combination number for full time use or for public use whereby code is erased once door is opened. Supervisor overrride code to reset if code forgotten. Factory fitted at time of ordering lockers. Masterkey override is not included and is available at checkout.	£67.79 ea +vat
Master Key
	Probe Master Key (for camlocks) Probe Master Key (for camlocks) Master keys for lockers are a handy piece of equipment and should be only issued to supervisors or personnel in charge of lockers. Access can be gained to many locker compartments with one master key which fits a series of different locks. Providing controlled access to locker compartments when either keys are lost or access required urgently.	£16.00 ea +vat

Slimline lockers are only 225mm wide
Provides efficient utilisation of limited floor space
Available also in 2 Tier, 3, 4, 5 and 6. Prices on application
Call our sales office on 01924 240291 quantity discounts 10+ available
Delivery: 18 working days

Currently delivery lead times on these products are longer than advertised. If you require this product by a certain date, please contact us for advise.

Request Callback

Slimline lockers offer a practical solution where storage space is limited. They are narrower than a standard locker allowing more staff to be accommodated. This single door slimline locker allows full clothes hanging. Other door configurations such as two door, three door or four door, five door and six door slimline lockers are available on request of by calling our sales team on 01924 240291 for pricing.

Air vent system at the top and bottom
Added security features: new interframe locking and welded plinths between compartments and centre of doors
Compartment height: 315mm Hanging: 1405mm
Comes with hat shelf, coat rail and two hooks
Available in nests of 1, 2 or 3
Camlocks or hasp & staple lock as standard
Nesting Bolts Available to add on at check out, please note 4 nesting bolts needed per side.

*Nearest off-loading point determined by driver. Driver not insured to carry up any stairs. Single driver Vehicle – Assistance will be required for off-loading of large orders.

Delivery to Home Addresses: Sorry but we are unable to deliver this product to home addresses.

Please Note: The vast majority of our products are manufactured to order and cannot be taken back into stock or exchanged after delivery. Further for further information please contact us.

Code	Height	Width	Depth
M11511	1800mm	225mm	450mm
M11611	1800mm	225mm	500mm

The locking options below are availble to buy after adding the product above to your basket.

M Series Standard Camlock

Standard camlock with 2 keys per lock
Available at checkout at no additional cost
Replacement locks and/or keys are available at a later date

M Series Hasp & Staple Latch Lock

Hasp & Staple Latch locks for use with padlocks to secure lockers.
Oval handle with round cut out to take a 6mm padlock shaft. (Padlocks not included)
Fitted as a no cost option when ordering lockers. Replacements available at additioanal cost.

M Series Coin Return lock

Coin return locks ensure keys are returned ready for next user.
Comes with 2 keys per lock
Key is kept captive until £1 coin is inserted.
Coin is returned into tray for user to reclaim
Available at checkout at additional cost

M Series Ronis Coin Retain Lock

Create an income stream from lockers
Available as £1 or 20p coin retain locks
Rear facing box to collect coins
2 keys included kept captive until coin inserted
Available as factory fitted option at checkout at additional cost

M Series 4 Scroll Combination Lock

4 scroll mechanical combination lock
10,000 combinations
Ideal combination scroll lock for continuous use by one person
Can be re-set to new code on change over of staff
Master reset key available at checkout to find lost codes
Available at checkout at additional cost

M Series Digital Combination Lock

Battery run with 2 AA batteries
Over 15,000 openings
Public (reset new code after each opening) and Private use settings(continuous use with same code until reset to new code)
Masterkey available to gain access after battery failure
Available at checkout at additional cost

The accessories below are availble to buy after adding the product above to your basket.

M Series Installation Nesting Bolts Pack of 25

Serious injury could be caused by locker or cupboard tip over. It is important to install your lockers or cupboards side to side, back to back and back to wall. Nesting bolts to suit M Series lockers, please note 4 nesting bolts per side required. Nesting Bolts are supplied as packs of 25, please calculate how many nesting bolts required and order accordingly. Please see our installation guide https://www.3dlockers.co.uk/guides/how-to-install-lockers/

Probe Master Key (for camlocks)

Overrides standard locks
Controlled issue key allowing supervisor access to locked compartments
Lock type to be Lowe and Fletcher or Ronis

Probe Plastic Number Plates

Suitable for PROBE lockers
Plastic number plates with white backgrounds and black lettering
Slips neatly into plastic holder plate on locker door and reveals itself as a round disc
Ideal for locker identity

Standard Delivery Leadtime
Estimated delivery is 18 working days. Leadtimes quoted are in indication only, and may increase/decrease depending on manufacturing capacity at time of order. Larger orders may take longer than the estimated delivery leadtime.

Standard Delivery Day and Time
The vast majority of deliveries are made anyday Mon-Fri 8.30am to 5.00pm.

Specific Day and Timed Deliveries
On certain products, it may be possible to request a particular day or time for delivery at additional cost. Please contact us for further information and pricing.

Standard Delivery Cost (UK Mainland)
FREE DELIVERY is available on the vast majority of products for orders over £150.00+vat. A £25.00+vat carriage charge will be applied if the order value falls under this amount.

Scottish postcodes including HIghlands and Islands, Truro and Belfast are also exempt from free delivery on certain products. Please check product page for further information and contact us for pricing.

Delivery (Non UK Mainland)
Delivery to extremities and offshore locations is available by arrangement and at an extra cost.

Delivery To Home Addresses: Sorry but we DO NOT deliver to home addresses at this time. If we deem a delivery is to a home address, we will automatically cancel and refund the order within 5 working days.

Delivery Restrictions
Please advise of any delivery restrictions (opening times and vehicle access sizes) prior to order. Failed deliveries will be chargeable.

Please note delivery is to a ground floor entrance or nearest offloading point only which maybe kerbside only. Driver's are not insured to distribute goods around a building or use lifts.

Off loading preparation
For larger orders, assistance will be required in offloading.

See our full delivery and returns policy.

Installation Service
Our installation service is available on this product. Please call our friendly sales team on 01924 24291 for more up to date information.

* Subject to area, subject to order quantity.

The contraction of infection from equipment is a recognised risk in the healthcare sector, office and education establishments and public buildings. It is essential to take precautions to reduce the risk of bacterial cross contamination.

Here at 3D Lockers we can provide an effective solution to minimizing these risks. Our storage lockers have a unique anti-bacterial powder coating incorporated at the time of manufacture. BioCote antimicrobial technology offers constant protection against a wide range of bacteria including MRSA, E. coli, Salmonella, Listeria and Campylobacter.

Field tests have proven that storage equipment treated with BioCote powder coating benefit from a 94% reduction in bacteria on their surface, helping to create a cleaner and more hygienic working environment.

BioCote also helps stop the build up of ugly black mould, keeping their appearance for longer.

BioCote will not wear off or leak – it is long lasting and will retain its antimicrobial efficiency for the lifetime of a product!

Easy Payment Options

FREE Standard UK Delivery

Request A Quote

Over 25 Years Trading

Slimline Lockers