Link Lockers Combi Dispenser/Collector Locker 5 Door - 178x38x46cm

Code: M185DCDC

Select size

Select colour
Standard colours

Pastel colours - note pastel colours incurr a 0% surcharge

Select lock

QTY:

£256.47 +VAT

£307.76 inc VAT

Select Extras

Lock
	M Series Standard Camlock M Series Standard Camlock Ronis standard camlocks for use on Link metal lockers come with 2 keys as standard and are fitted using a horseshoe clip fitting. They are a none cost option when ordered with metal lockers and are factory fitted. Replacements also available at additional cost.	£0.00 ea +vat
	M Series Hasp & Staple Latch Lock M Series Hasp & Staple Latch Lock Hasp & Staple Latch locks for use with padlocks to secure lockers (Padlocks not included but can be purchased as an accessory if required). Oval handle with round cut out to take a 6mm padlock shaft. Fitted as a no cost option when ordering lockers. Replacements available.	£0.00 ea +vat
Master Key
	M Series Masterkey (for Camlocks) M Series Masterkey (for Camlocks)	£16.80 ea +vat

Ten compartments dispensing locker with collection locker beneath
Ideal space saving unit combining dispensing and collection in one unit
Air vent system to top & bottom of unit
Single service door provides access to inner compartment
Delivery: 15 working days

Currently delivery lead times on these products are longer than advertised. If you require this product by a certain date, please contact us for advise.

Request Callback

Locker Dimensions

Height : 1778 mm
Size: 381 mm w x 457 mm d
Clear aperture: 147 mm h x 245 mm h

Fittings included as standard

Hooks for Garment Sack ( Sack not included)
Full height main door allows access to all compartments for re stocking
5 individual doors inset into main frame door

Security features

New interframe locking and welded plinths between compartments and centre doors
Compartment doors remain locked when mainframe door is in the open position

*Nearest off-loading point determined by driver. Driver not insured to carry up any stairs. Single driver Vehicle – Assistance will be required for off-loading of large orders.

Delivery to Home Addresses: Sorry but we are unable to deliver this product to home addresses.

Please Note: The vast majority of our products are manufactured to order and cannot be taken back into stock or exchanged after delivery. Further for further information please contact us.

Code	Height	Width	Depth
DDC151805	1778mm	381mm	457mm

The locking options below are availble to buy after adding the product above to your basket.

M Series Standard Camlock

Standard camlock with 2 keys per lock
Available at checkout at no additional cost
Replacement locks and/or keys are available at a later date

M Series Hasp & Staple Latch Lock

Hasp & Staple Latch locks for use with padlocks to secure lockers.
Oval handle with round cut out to take a 6mm padlock shaft. (Padlocks not included)
Fitted as a no cost option when ordering lockers. Replacements available at additioanal cost.

The accessories below are availble to buy after adding the product above to your basket.

M Series Masterkey (for Camlocks)

Masterkey override for M sereis standard metal lockers.

L&F camlocks 95/97series

M Series Numbered Key Rings

Numbered key rings to match numbering system on locker doors
Round discs printed with upto 4 digits long
Split pin ring

M Series Number Plate

Size 37mm long x 19mm high
Fits neatly into M sereis plastic escutcheon plate around lock
Rigid plastic with self adhesive backng

M Series Garment Locker Stand

M Series Garment Series Sloping Top

Standard Delivery Leadtime
Estimated delivery is 15 working days. Leadtimes quoted are in indication only, and may increase/decrease depending on manufacturing capacity at time of order. Larger orders may take longer than the estimated delivery leadtime.

Standard Delivery Day and Time
The vast majority of deliveries are made anyday Mon-Fri 8.30am to 5.00pm.

Specific Day and Timed Deliveries
On certain products, it may be possible to request a particular day or time for delivery at additional cost. Please contact us for further information and pricing.

Standard Delivery Cost (UK Mainland)
FREE DELIVERY is available on the vast majority of products for orders over £150.00+vat. A £25.00+vat carriage charge will be applied if the order value falls under this amount.

Scottish postcodes including HIghlands and Islands, Truro and Belfast are also exempt from free delivery on certain products. Please check product page for further information and contact us for pricing.

Delivery (Non UK Mainland)
Delivery to extremities and offshore locations is available by arrangement and at an extra cost.

Delivery To Home Addresses: Sorry but we DO NOT deliver to home addresses at this time. If we deem a delivery is to a home address, we will automatically cancel and refund the order within 5 working days.

Delivery Restrictions
Please advise of any delivery restrictions (opening times and vehicle access sizes) prior to order. Failed deliveries will be chargeable.

Please note delivery is to a ground floor entrance or nearest offloading point only which maybe kerbside only. Driver's are not insured to distribute goods around a building or use lifts.

Off loading preparation
For larger orders, assistance will be required in offloading.

See our full delivery and returns policy.

Installation Service
Our installation service is available on this product. Please call our friendly sales team on 01924 24291 for more up to date information.

* Subject to area, subject to order quantity.

The contraction of infection from equipment is a recognised risk in the healthcare sector, office and education establishments and public buildings. It is essential to take precautions to reduce the risk of bacterial cross contamination.

Here at 3D Lockers we can provide an effective solution to minimizing these risks. Our storage lockers have a unique anti-bacterial powder coating incorporated at the time of manufacture. BioCote antimicrobial technology offers constant protection against a wide range of bacteria including MRSA, E. coli, Salmonella, Listeria and Campylobacter.

Field tests have proven that storage equipment treated with BioCote powder coating benefit from a 94% reduction in bacteria on their surface, helping to create a cleaner and more hygienic working environment.

BioCote also helps stop the build up of ugly black mould, keeping their appearance for longer.

BioCote will not wear off or leak – it is long lasting and will retain its antimicrobial efficiency for the lifetime of a product!

Easy Payment Options

FREE Standard UK Delivery

Request A Quote

Over 25 Years Trading

Link Lockers Combi Dispenser/Collector Locker 5 Door - 178x38x46cm